Our fleet consists of Hilux Dual Cabs and Landcruisers in either the Wagon, Troop Carrier or Tray. We also have mine compliant 12 and 21 Seater Buses, as well as 4WD Tipper and Tray Trucks.
Most 4WD vehicles are fitted standard with towbars and bullbars, but we can also add the following accessories onto your vehicle:
Most sites in Queensland require vehicles to be (BHP Billiton Mitsubishi Alliance) BMA Compliant.
The following are requirements for vehicles entering the site:
All vehicles entering BMA sites must have ROPS. This can either be Internal or External. We can provide either with our vehicles for increased driver and passenger safety.
For increased visibility, white vehicle colour is required.
Flashing amber lights must be present on all vehicles entering BMA sites.
All vehicles entering a BMA site must carry digital VHF radios.
For added driver protection, a drivers side airbag is required.
Tray tie down points are required for safety when items are required to be carried in the back of utes.
Indicators, brake and tail lights are to be raised to above the roof line for increased visibility.
Kits must be supplied for minor scrapes and injuries.
We stock 2.3KG Fire Extinguishers in our BMA Compliant vehicles for added safety.
High visibility reflective flags are required for increased vehicle visibility.
In the instance of a flat battery, Jump Start Receptacles reduce the occurrence of mistakes being made.
This isolator is wired in such a way that all other vehicle electrics are still functional, even when the isolator is in the OFF position when required to isolate the starter motor.
This clearly identifies the vehicle with its radio call sign. They are placed on both sides of the vehicle, with reflective yellow text on a black background.
For increased visibility, reflective tape is to run along both sides of the vehicle.
For safety, a reverse beeper is required.
All of our vehicles carry Traffic Control Equipment to alert other road users of breakdowns or accidents.
Bright yellow in colour, these offer increased visibility of the wheel nuts.
Visible wheel chocks are required for all vehicles parked on sloped surfaces.
All of our vehicles fitted with ROPS require a Queensland Government Modification Plate.
BMA Compliant require a licenced inspector to ensure the above items have been incorporated on the vehicle. Once checked, the vehicle is issued with a BMA Compliant sticker.
Turnbulls Hire Drive is a Victorian based company, but please do not let this deter you. We endeavour to provide quality vehicles that are regularly serviced in our own workshops. Our customer base also consists of Thiess Degremont Joint Venture, the Department of Sustainability and Environment (DSE), McDermott Australia, Anglo Coal, Thomas & Coffey, TruEnergy, Roche Thiess Linfox (RTL) and Silcar to name a few.
We can hire to clients in New South Wales, Queensland, South Australia, Tasmania and Perth for all hires over 28 days.
We can also hire to all other parts of Western Australia and the Northern Territory for hires of 3 months.
Whatever your requirements are, please contact our friendly staff for an obligation free quote.
ROPS (Roll Over Protection Structures)
White Vehicle Colour
Flashing Light
VHF Radio
Airbag On Drivers Side
Load Restraints
Elevated Tail Lights
First Aid Kit
Fire Extinguisher: 2.3 Kg
Buggy Whip
Jump Start Receptacles
Starter Motor Isolator
Positive ID Signage
Reflective Tape
Reverse Beeper
Traffic Control Equipment
Wheel Nut Indicators
Wheel Chocks
Queensland RTA Modification Plate
BMA Compliance Plate
